Whether the bag house pulse valve is small or large, its cost in the market is not low. It requires us to spend a considerable amount of money. Moreover, it is relatively large in volume and heavy in weight. Transportation is inherently difficult. If safety work is not done well during transportation, It is very likely to be damaged during transportation, which will cause us great economic losses. So, what issues should be noted when transporting the bag house pulse valve? Let's have a look.

Disassemble and pack the equipment tightly and securely.

The bag house pulse valve has a large number of components, including the dust removal skeleton, dust removal bag, controller, electromagnetic pulse valve, blow pipe, perforated plate, etc. Each part plays an important role. In order to facilitate the transportation of the bag house pulse valve, we need to disassemble some easily detachable dust collector parts, mark them with serial numbers, and package them separately. The packaging should be tight and tight so as to prevent the parts from falling, colliicking and being damaged. For some parts that cannot be disassembled, we should not disassemble them at will. Otherwise, it is possible to damage the structure of the bag house pulse valve, resulting in malfunctions of the equipment during use.

2. Take good protective measures and choose flat roads for driving.

When transporting the bag house pulse valve, protective measures also need to be taken. A rain cover or tarpaulin should be prepared on the transport vehicle. This can not only prevent the bag house pulse valve equipment from getting wet due to rain, but also provide shade and wind protection. In short, the dust collector will not be affected by the weather. Therefore, it is very necessary to do a good job in protection. Moreover, during transportation, flat roads should be chosen for driving to reduce the jolts along the way. Drive at a constant speed and avoid sudden braking or acceleration. Otherwise, it is easy to cause the collision deformation of the bag house pulse valve. This point should be noted.

Which factors are related to the dust removal efficiency of the bag house pulse valve? What factors have affected the dust removal efficiency of the bag house pulse valve? How to enhance the dust removal effect while effectively reducing the operating costs of enterprises has become a difficult problem facing each enterprise.

1. The rotation direction, speed, bearing vibration and temperature of the fan.

2. Whether the processing air volume and the pressure and temperature at each test point are consistent with the design.

3. The installation condition of the dust removal filter bags, whether there are any issues such as bag dropping, loose openings, or wear after use, can be judged by visually inspecting the emissions from the chimney after operation.

4. It is necessary to pay attention to whether there is condensation in the bag chamber and whether the ash discharge system is unobstructed. To prevent clogging and corrosion, severe dust accumulation can affect the production of the main unit. Carry out the daily usage inspection of the bag house pulse valve well to make it serve us well, achieving high dust removal efficiency and low operating cost.

5. The adjustment of the dust cleaning cycle and time is a crucial factor that affects the dust collection performance and operational status. If the dust cleaning time is too long, the adhering dust layer will be removed, which becomes the cause of filter bag leakage and damage. If the dust cleaning time is too short and the dust on the filter bags has not been removed before resuming the filtration operation, the resistance will quickly recover and gradually increase, affecting its usage effect.

6. The time interval between two dust cleanings is called the dust cleaning cycle. Generally, it is hoped that the dust cleaning cycle can be as long as possible to enable the dust collector to operate under economic resistance conditions. Therefore, a careful study should be conducted on the properties of dust, dust concentration, etc., and the dust cleaning cycle and time should be determined according to different dust cleaning methods. Adjustments should be made during the trial operation to achieve the best dust cleaning parameters. The stainless steel dust collector equipment has a low cost. Due to the high filtration load, the filtration area required to handle the same flue gas volume is smaller than that of the reverse-blowing bag house pulse valve. Therefore, the equipment is compact and occupies a small area.

bag house pulse valve https://www.cnsbfec.com/DMF-MF-T-Pulse-Valve.html